top of page

News + Media - Post

  • Writer's pictureRove Group

Honda increase output at UK plant by 30%

Global leader in automotive factory automation, Daifuku, has completed an upgrade project at Honda of the UK Manufacturing, which has achieved a 30% increase in output.

In 2016, Honda confirmed its Swindon site as the global production hub for the all-new Civic. It has since invested a further £200m in the plant, which now employs more than 3,500 people.

Working closely with Honda engineers, Daifuku was tasked with increasing daily production from 640 to 790 units. In terms of cars rolling off the line, this meant speeding up the production rate by 16 seconds – reducing the time finished vehicles were delivered from 85 seconds, down to 69 seconds.

Paul Mack, project engineer at Daifuku, said: “Daifuku has a long and very successful relationship with Honda over a period of decades.
“A lot of the conveyors, lifts and other lineside logistics equipment inside the Swindon plant has been there for twenty years, and continues to work reliably and safely.
“Given their strong environmental ethos, the team at Honda was keen for us to retain as much original equipment as possible, while enabling the sizeable increase in output.”

To achieve the 30% increase in productivity, Daifuku engineers focused on three main areas of the lineside logistics process:

  • Triple decking vehicles exiting the paint shop – preventing bottlenecks

  • Creation of more workstations at various strategic locations – increasing productivity

  • Changing the structure of the line to accommodate the introduction of kitting and complete units – improving supply chain efficiencies

The significant increase in lineside efficiency was produced by carefully increasing the speed of the chains that transported the vehicles down the line. However, this enhancement was not as simple as it might first appear.

Mack explains: “Turning up to speed on the chains sounds simple, but we had to consider several key effects of this change – most notably safety. Large metal objects moving within a tightly controlled, highly populated space deserves careful consideration. And that’s exactly what we did.”

Story originally found on The Manufacturer

8 views0 comments


bottom of page